When you scan a pile of letters in one go, PaperStream Capture can save them all into a single file. BetterLetter then treats that file as one letter with lots of pages.
If a letter contains information about more than one patient, BetterLetter may struggle to identify which patient the letter relates to. This can make the preparation process more difficult and may mean you need to provide some support before the letter can be prepared correctly.
To avoid this, tell PaperStream Capture how to divide your scan so that each patient letter is saved as its own file.
Step 1: Get your letters ready
Remove any staples, paper clips and sticky notes.
Keep each letter’s pages together and in order.
If you plan to divide by page count, sort your letters into piles with the same number of pages, for example one pile of one-page clinic letters and one pile of two-page letters.
Step 2: Open PaperStream Capture
Open PaperStream Capture. It has two modes, and you can switch between them with the Switch Modes button:
Simple Scan mode: scan straight away and choose how to divide your letters each time.
Batch Scan mode: scan using a saved job with the dividing settings already set up. Jobs were called profiles in versions before 4.0.
Steps 3 to 5 use Simple Scan mode. If your practice uses a job, see Setting up a job to divide your letters further down.
Step 3: Choose how to divide your letters
Click Scan.
In the window that opens, go to Options and choose a setting for Divide documents:
Option | What it does | When to use it |
No | Saves everything into one file. | Only when you’re scanning a single letter. |
Divide documents into files, each consists of [number] | Starts a new file after the number of pages you enter. | When every letter in the pile has the same number of pages, for example a pile of one-page clinic letters. |
Divide documents when [Ctrl] is pressed | Starts a new file each time you press the Ctrl key. | Mixed piles, where letters have different numbers of pages. |
Step 4: Scan
Click Scan.
Step 5: Add your letters to BetterLetter
Upload the files to BetterLetter as usual. See How to Scan and Upload Letters to BetterLetter.
Setting up a job to divide your letters
If your team scans letters every day, a saved job means nobody has to remember to change the setting. You only need to do this once. If you’re not sure, ask whoever manages your scanner.
In PaperStream Capture, click Configure Jobs.
Select the job you use for letters and click Edit.
Select the Separation tab.
Under Type, choose how to divide your letters:
Press Ctrl: press the Ctrl key between letters. This is best for mixed piles.
Page Count: start a new file after a set number of pages. This is best for piles where every letter is the same length.
Click Save, then Close, then Back to Home.
To use Press Ctrl with a job, set your scanner’s feed mode to Manual Single Mode. Then scan one letter, press Ctrl before loading the next letter, and repeat. The job also needs to have been created with Advanced Setup.
Already scanned a pile into one file?
If a batch has already reached BetterLetter as one file, you don’t need to scan it again. You can split it into separate letters. See How to split a letter.
Still need help? Contact us via our live chat.

